Para magamit nyo 100% bandwidth ng Internet Connection

For limiting the system reserve bandwidth you will have perform the following steps.

Step 1: First of all you should click the start button and type Run. You will get the Run screen appeared.

[You must be registered and logged in to see this image.]

Step 2: Type gpedit.msc in the run option.

[You must be registered and logged in to see this image.]


Step 3: You will be directed to the Local Group Policy Editor where you can find Computer configuration and the User configuration.


[You must be registered and logged in to see this image.]


Step 4: Click the Administrative Templates that is present in the Computer configuration option. Select Network in the Administrative templates.


[You must be registered and logged in to see this link.]



Step 5: You will be getting list of setting for the Network option in the Administrative templates. Click on the QoS Packet Scheduler

[You must be registered and logged in to see this image.]

Step 6: Here you can find the list of setting for the packets. Now here you should double click Limit reservable bandwidth.

[You must be registered and logged in to see this image.]

Step 7: You will be getting a new window to change the setting. By default Not Configured option will be selected.

[You must be registered and logged in to see this image.]


Step 8: When you see that if the default option is Not Configured, even then you can see that the default bandwidth allocation will be 20 percent.


Step 9: You can click the Enabled option and you can find that the Bandwidth limit will be showed as the 20%


[You must be registered and logged in to see this image.]

Step 10: You can now make the Bandwidth limit value as zero and click the Ok button to finish the setting.

[You must be registered and logged in to see this image.]



Necessity of limiting reservable bandwidth

This particular configuration is necessary because 20 percent of your system bandwidth is getting wasted and not used by your network. Usually when the network adapter makes the changes in the registry this particular setting is ignored and the default limit of bandwidth reserved is in 20 percent itself. So when the network adapter configuration is done automatically it is necessary that we should go for the manual changes in the limiting of the system reserved bandwidth. This helps in making use of our network bandwidth to greater extent.


[You must be registered and logged in to see this image.]



Even if you keep the default reserved bandwidth in the Disabled position even then 20 percent will be set to default and used by the network adapter.